Dig Valve AC 1″ Inline with 24VAC

SKU: NUR2607 Categories: , , Tags: , ,

$30.00

Add to Wishlist
Add to Wishlist

Description

DIG’s 1” plastic control valves are designed for reliable operation with superior hydraulic performance. The plastic control valves demonstrate exceptional performance for optimal control of any irrigation system, featuring a flow control handle for flow adjustment and manual shutoff, and internal manual opening via the solenoid for smooth opening and closing. The plastic control valves are suitable for the above- or below-grade installation in residential and commercial applications.

Features:

  • Constructed of a UV-resistant, glass-reinforced nylon bonnet with a stainless steel spring and non-corrosive materials
  • High flow with low-pressure loss
  • Operates in a wide range of flow rates
  • Normally closed
  • Flow control handle for water flow adjustment and manual shutoff
  • Manual or automatic operation
  • Flow-control adjustment – can be used to reduce sprinkler over-spray
  • Smooth valve opening and closing prevents pressure surge hazards
  • The valve’s only moving component is its diaphragm with no shaft, seals, or bearings within the water passage
  • An unobstructed flow path for higher flow rate with lower head loss
  • Highly durable to chemical use with an irrigation system
  • Flexible balanced diaphragm and seal
  • Available in diameter sizes of 3/4” to 2”

Specifications:

  • Body Styles: inline (globe) valve
  • Operating pressure: 10 to 150 PSI (.7 to 10.5 bar)
  • Valve size: 3/4″, 1″ ,1 1/2″ and 2″ with FNPT or British standard thread (BSP)
  • Operating flow range:
    • 3/4″: .1 to 28 GPM (.23 to 6.4 m3h)
    • 1″: .2 to 35 GPM (0.45 to 8 m3h)
    • 1 1/2″: 20 to 132 GPM (4.5 to 30 m3h)
    • 2″: 30 to 160 GPM (6.8 to 36 m3h)
  • Solenoid: 24VAC (50 -60 cycles)
    • Current: .032A (7.7 VA)
    • Holding Current: 0.16A (3.84 VA)
    • Power Consumption: 1.7/2.2 watts
  • Material:
    • Body: glass-reinforced nylon
    • Bonnet: glass-reinforced nylon
    • Solenoid: glass-reinforced nylon
    • Spring and pins: Stainless steel
    • Diaphragm: Nylon fabric reinforced polyisoprene (NR)
  • Dimensions:
    • 3/4″ and 1″: 4.5″ H x 4.25″ L x 3.12″ W, (11.5 cm H x 11 cm L x 8 cm W)
    • 1 1/2″: 7.12″ H x 6.12″ L x 5.75″ W, (18 cm H x 16 cm L x 14.5 cm W)
    • 2″: 8.5″ H x 6.12″ L x 5.75″ W, (21 cm H x 16 cm L x 14.5 cm W)
    • Valve solenoid thread housing: 3/4”-20 UNES-2A

Additional information

Weight .8 lbs
Dimensions 6 × 5 × 3 in

Bulk Discount

This product is not eligible for bulk discounts.