Description
DIG’s 1 1/2″ plastic control valves are designed for reliable operation with superior hydraulic performance. The plastic control valves demonstrate exceptional performance for optimal control of any irrigation system, featuring a flow control handle for flow adjustment and manual shutoff, and internal manual opening via the solenoid for smooth opening and closing. The plastic control valves are suitable for the above- or below-grade installation in residential and commercial applications.
Features:
- Constructed of a UV-resistant, glass-reinforced nylon bonnet with a stainless steel spring and non-corrosive materials
- High flow with low-pressure loss
- Operates in a wide range of flow rates
- Normally closed
- Flow control handle for water flow adjustment and manual shutoff
- Manual or automatic operation
- Flow-control adjustment – can be used to reduce sprinkler over-spray
- Smooth valve opening and closing prevents pressure surge hazards
- The valve’s only moving component is its diaphragm with no shaft, seals, or bearings within the water passage
- An unobstructed flow path for higher flow rate with lower head loss
- Highly durable to chemical use with an irrigation system
- Flexible balanced diaphragm and seal
- Available in diameter sizes of 3/4” to 2”
Specifications:
- Body Styles: inline (globe) valve
- Operating pressure: 10 to 150 PSI (.7 to 10.5 bar)
- Valve size: 3/4″, 1″ ,1 1/2″ and 2″ with FNPT or British standard thread (BSP)
- Operating flow range:
- 3/4″: .1 to 28 GPM (.23 to 6.4 m3h)
- 1″: .2 to 35 GPM (0.45 to 8 m3h)
- 1 1/2″: 20 to 132 GPM (4.5 to 30 m3h)
- 2″: 30 to 160 GPM (6.8 to 36 m3h)
- Solenoid: 24VAC (50 -60 cycles)
- Current: .032A (7.7 VA)
- Holding Current: 0.16A (3.84 VA)
- Power Consumption: 1.7/2.2 watts
- Material:
- Body: glass-reinforced nylon
- Bonnet: glass-reinforced nylon
- Solenoid: glass-reinforced nylon
- Spring and pins: Stainless steel
- Diaphragm: Nylon fabric reinforced polyisoprene (NR)
